HOME DECORATORS COLLECTION SP6778 42 in Infrared Wall Mount Electric Fireplace User Manual
Table of Content
The fireplace can be operated by either the remote control or the control panel unit side. When the remote control stops operating or its range seems reduced, it is time to replace the batteries. The battery compartment is located on the back end of the remote control. Using the Child Lock featureWhen the unit is ON, hold the Lock button for 3 seconds to activate the Child Lock function.
Attach the heater directional bracket using two screws to the fireplace . To disconnect this appliance, turn controls to the off position, then remove the plug from the outlet. Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are cleaning the heater. Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
Home Decorators Collection Electric Fireplace Wall Mounted Metal in Black
13. Use this appliance only as described in the manual. Any other use is NOT recommended by the manufacturer and may cause fire, electric shock or injury to persons. 11. Do NOT insert or allow foreign objects to enter any ventilation or damage the appliance.
Push the Power button again to turn off all functions. Hang the fireplace to the wallHang the fireplace to the wall as shown. Remove the front glassRemove the front glass for easy installation. Mark the drill holesUse a level to align the bracket and mark the holes with a pencil. PLANNING ASSEMBLYBefore you begin, locate the instructions and hardware.
More items related to this product
Be sure you have all of the parts and can identify them. The fireplace is subjected to prolonged periods of dampness or condensation. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations.
NEVER place heater where it may fall into a bathtub or other water container. Interest will be charged to your account from the purchase date if the balance is not paid in full within 6 months. Minimum monthly payments are required. Subject to credit approval.
People who viewed this item also viewed
This device must accept any interference received, including interference that may cause undesired operation. When the unit is in OFF mode, the power icon indicator light is red. When the power is OFF, the unit stops working. If the heater was operating before the power was turned OFF, the fan will continue to run for 20 seconds to ensure there is no heat trapped inside the unit. Install the bottom bracketSecure the bottom bracket to the fireplace using two screws as shown.
This appliance is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Keep combustible material, such as furniture, pillows, bedding, papers, clothes and curtains, at least 3 ft. from the front of the heater and keep them away from the side and rear. Read all instructions before installing or using the heater.
Inch 10 Color LED Digital Flames Black Inset Wall Mounted Electric Fireplace
Take up to 60 days to evaluate any item you have purchased from Heartland America. If you're not completely satisfied, return it to us, and we will cheerfully refund the merchandise price. Press the small tab inward as you slide the battery door open and remove the old battery. The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents is recommended. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This is a safety feature. If you are unable to insert the plug into the electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician.
DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions. DO NOT operate any heater if it has been dropped or damaged in any manner. Disconnect power at service panel and have heater inspected by a reputable electrician before reusing. Discard heater, or return to authorized service facility for examination and/or repair. Delivery times may vary, especially during peak periods. Drill holes at marked locations, then insert wall anchors into the holes.
E3 will be displayed, buzz and flash 3 times. When E3 is ON, heater is locked, E3 will display when adjust temperature setting. ELECTRICAL CONNECTIONThis product is equipped with a polarized plug . To reduce the risk of electrical shock, this plug will fit into a polarized outlet only one way.
14. This appliance has hot and arcing or sparking parts inside DO NOT use it in areas where gasoline, paint or flammable vapors or liquids are used or stored. This fireplace should not be used as a drying rack for clothing. Christmas stockings or decorations should not be hung in the area of it.
To deactivate the Child Lock function, hold the Power button for 3 seconds. Press the button to adjust the timer setting cycle around from 0 hour to 9 hours with 1 hour interval. When the ambient temperature is higher than the set temperature, heater will turn off automatically.
Comments
Post a Comment